Skip to content
Dronestacks
PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)1 / 2

PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)

Model AeroFC V2

General-purpose STM32H7 flight controller in an aluminium case, triple IMU, dual CAN, compatible with ArduPilot and PX4 firmware.

PSold byPDRL (Passenger Drone Research)
Weight
weighing only 108g
Processor
Main Processor STM32H7 Series 32-Bit ARM Cortex-M7 Core, 480 Mhz; Coprocessor STM32F1 Series 32-Bit ARM Cortex-M3 Core, 72MHz
Autopilot / firmware
It supports widely used platforms such as ArduPilot and PX4
Redundant IMUs
Sensors: Triple IMU System

Price

₹30,760

Enquire about PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)

Free, no account. We pass it on to PDRL (Passenger Drone Research).

Enquire about PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)

Free, no account. We pass it on to PDRL (Passenger Drone Research).

  • Free
  • No account
  • Vendor replies

Where to buy

Not sold online yet. Ask PDRL (Passenger Drone Research) for a quote, delivery and dealers near you with “Get a quote” above.

About this product

AeroFC V2 is PDRL's general-purpose flight controller for multirotor and other UAV builds, aimed at mapping, inspection, logistics, agriculture and custom projects. It uses the same electronics layout as the Ag++ (STM32H7 Cortex-M7 at 480 MHz with an STM32F1 I/O co-processor, three isolated IMUs, magnetometer and two barometers) in an aluminium case, but is meant for open-source autopilot firmware: the brochure names ArduPilot and PX4 and compatible ground stations. It offers 8 motor PWM and 4 auxiliary outputs, two CAN buses for radars and altimeters, UARTs, I2C, telemetry, USB, SD card, PPM/SBUS input and support for two GPS units. PDRL lists a 6-month warranty.

Specifications

8 of 8 published by the vendor. “Ask the vendor” means the brochure does not say.

Environment

Operating temperature
Operating Temperature -40°C to +85°C

General

Weight
weighing only 108g
Dimensions (L × W × H)
Size 89 x 45 x 30 mm

Hardware

Processor
Main Processor STM32H7 Series 32-Bit ARM Cortex-M7 Core, 480 Mhz; Coprocessor STM32F1 Series 32-Bit ARM Cortex-M3 Core, 72MHz
Autopilot / firmware
It supports widely used platforms such as ArduPilot and PX4
Redundant IMUs
Sensors: Triple IMU System
Interfaces & ports
Motor PWM I/Os 8; Auxiliary PWM/Digital I/Os 4; CAN Interface 2; Auxiliary UARTs 2; I2C 1; USB 1; Supported RC Signals PPM/SBUS
Sensor type
IMU1/IMU3 (Isolated); MAG 1 + MAG2/MAG3 external; BARO1 isolated + on board
Need a spec that isn't listed?

Enquire about PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)

Free, no account. We pass it on to PDRL (Passenger Drone Research).

P

PDRL (Passenger Drone Research)

Nashik

Nashik maker of AeroGCS ground control software, agri-drone flight controllers, GNSS and RC hardware, and drones

Enquire about PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)

Free, no account. We pass it on to PDRL (Passenger Drone Research).

All products

Documents and videos

More details

Made in
India

PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)

₹30,760

Enquire about PDRL AeroFC V2 flight controller (ArduPilot/PX4 compatible)

Free, no account. We pass it on to PDRL (Passenger Drone Research).