Agam GNSS Base RTK Module (u-blox ZED-F9P)
Model GNSS Base RTK
u-blox ZED-F9P RTK GNSS module that works as base or rover over UART/USB-C, with external helical antenna; 0.01 m + 1 ppm RTK, 7 Hz.
Sold byAgam Robotics Bangalore Urban- GNSS constellations
- GNSS Constellations GPS / QZSS, Galileo, GLONASS, BeiDou
- RTK / PPK
- RTK Support: Yes; work either as RTK Base or Rover
- Positioning accuracy
- Positioning Accuracy 0.01m; RTK: 0.01 m +1ppm
Price
₹30,000
- Free
- No account
- Vendor replies
Where to buy
Not sold online yet. Ask Agam Robotics for a quote, delivery and dealers near you with “Get a quote” above.
About this product
The Agam GNSS Base RTK is a GNSS module built around the u-blox ZED-F9P that can be set up either as an RTK base station or as a rover on the aircraft. As a rover it connects to the flight controller over UART on a 6-pin JST-GH connector; as a base it connects to the ground station over USB-C. It tracks GPS, QZSS, Galileo, GLONASS and BeiDou with an external helical antenna, and Agam quotes 0.01 m + 1 ppm accuracy in RTK, 1.5 m standalone and 1.0 m with SBAS, with RTK updates up to 7 Hz and raw data at 10 Hz. It runs on 5 V at about 150 mA and from -25 to 85 C. RTK use needs two modules; Agam's RTK kit pairs two units with a USB-C cable and a GNSS mount.
Specifications
6 of 6 published by the vendor. “Ask the vendor” means the brochure does not say.
Environment
- Operating temperature
- Operating Temperature -25℃ to 85℃
GNSS
- GNSS constellations
- GNSS Constellations GPS / QZSS, Galileo, GLONASS, BeiDou
- RTK / PPK
- RTK Support: Yes; work either as RTK Base or Rover
- Positioning accuracy (horizontal)
- Positioning Accuracy 0.01m; RTK: 0.01 m +1ppm
- Update rate
- RTK: 7Hz Max; PVT: 7Hz Max; RAW: 10Hz
- Interfaces & ports
- Port Type UART for Rover/USB-C Port for Base
Documents and videos
More details
- Made in
- India
Agam GNSS Base RTK Module (u-blox ZED-F9P)
₹30,000
